Baza znanja

IPv6 adoption continues to grow, and many VPS plans include a free IPv6 address alongside IPv4. This guide covers enabling and verifying IPv6 connectivity on your server.

Why IPv6 Matters

• IPv4 address exhaustion makes IPv6 increasingly important for future-proofing
• Some networks and mobile carriers prefer or require IPv6 connectivity
• No NAT required — every device gets a globally unique address

Step 1 — Check If Your VPS Already Has an IPv6 Address

ip -6 addr show

If an address appears under a public interface, IPv6 may already be configured — if not, check your provider's control panel for an IPv6 assignment option, as it's sometimes enabled separately from IPv4.

Step 2 — Verify Network Configuration

On Ubuntu/Debian with netplan:

sudo nano /etc/netplan/50-cloud-init.yaml

network:
  ethernets:
    eth0:
      addresses:
        - 203.0.113.10/24
        - 2001:db8::10/64
      gateway6: 2001:db8::1

Adjust the interface name and addresses to match values provided by your hosting provider.

Step 3 — Apply the Configuration

sudo netplan apply

Step 4 — Verify Connectivity

ping6 -c 4 google.com

Step 5 — Add an AAAA DNS Record

Type: AAAA
Name: @
Value: 2001:db8::10

See DNS Fundamentals: A, AAAA, CNAME, MX, TXT & NS Records Explained.

Step 6 — Configure the Firewall for IPv6

UFW manages both IPv4 and IPv6 rules together by default, but confirm IPv6 support is enabled:

sudo nano /etc/default/ufw

IPV6=yes

sudo ufw disable
sudo ufw enable

Step 7 — Configure Nginx/Apache to Listen on IPv6

In your Nginx server block:

server {
    listen 80;
    listen [::]:80;
    listen 443 ssl;
    listen [::]:443 ssl;
    ...
}

Testing Your Site Over IPv6

curl -6 https://yourdomain.com

Common Errors

IPv6 configured but not reachable externally — verify your provider's network actually routes the assigned IPv6 block to your VPS; contact support to confirm the assignment is active.

Site loads over IPv4 but not IPv6 — confirm the AAAA DNS record exists and the web server is explicitly configured to listen on the IPv6 interface, not just IPv4.

Best Practices

• Configure both A and AAAA records once IPv6 is set up, so clients can connect via either
• Test connectivity over IPv6 specifically after any network configuration change
• Ensure firewall rules cover both IPv4 and IPv6 consistently

FAQ

Do I need IPv6 if my VPS already has IPv4?
Not strictly required for most use cases today, but enabling it costs nothing extra on most plans and improves compatibility with IPv6-only or IPv6-preferring clients.

Related Articles

• DNS Fundamentals: A, AAAA, CNAME, MX, TXT & NS Records Explained
• How to Configure UFW Firewall on a Linux VPS
• How to Configure a Static IP on a Linux VPS